User's Guide

7



indicator appears on the display, the unit will go into Standby mode

automatically after selected time has expired.

Touch the DIMMER button to adjust the display intensity from High / Mid / Low

to obtain the best clarity of display readout.

Touch the LIGHT button to switch LOW / Mid / High / OFF brightness for the

night light.



1. Press the POWER button to turn on the unit, the BT indicator will flash

on the display

2. Set the Bluetooth function of your external device to ON and begin searching

for devices.

NOTE: The effective distance between your external device and this

apparatus is 10 meters (30 feet)

3. Once “YW-012” appears on the paired device list of your external device,

select it.

Notes: If cannot connect, press and hole BT PAIR button to reconnect again.

4. If you are asked for a password, enter “0000”

5. When both devices are successfully connected, the indicator will light on,

now you are ready to play music wirelessly from your device.

6. Press the PLAY/Pause button of external Bluetooth device or PLAY/Pause

button on the unit to start music playback.

7. Press the / button on external Bluetooth device to switch between

music tracks.

Note: After initial pairing, the unit will stay paired unless unpaired manually by

the user or erased due to a reset of the device. If your device should become

unpaired of your find it is unable to connect, repeat the above steps or press

BT PAIR button again.

AC Power

Adapter Connect DC Jack

Use included adapter

AC~ Input 120 / 60 Hz , DC Output 9V , 2000mA

Wireless Charging

Fast Charging

Loud Speakers Spec

2 Inch, 5 Watt , 4 Ohm

Specifications are typical, individual units might vary. They are subject to continuous

improvement without notice and without incurring any obligation.



Connectin

Bluetooth to Your Smart

hone / Tablet

Dimmer

Light Function

ecification