Installation Guide

E. Install the upper Pole Channel in
the same manner, aligning it to its
pre-determined and previously
marked vertical position on the
Mounting Pole.
F. Rotate the Pole Channel so it is
facing south. (See Figure 1-6)
G. Tighten the two Hose Clamps
securing the Pole Channel to the
Mounting Pole.
Figure 1-6: Installing Upper
Pole Channel
Figure 1-5: Installing Lower Pole Channel
B. Install the lower Pole Channel by slipping the Hose Clamps and Pole
Channel over the top of Mounting Pole and then slide it down to its pre-
determined and previously marked vertical position on the Mounting Pole.
C. Rotate the Pole Channel so that it is facing south. (See Figure 1-5)
D. Tighten the two Hose Clamps securing it to the Pole Channel.
N
E
W
S
Tighten
Hose
Clamps
Lower
Pole
Channel
6 of 10
Upper
Pole
Channel
Lower
Pole
Channel
Tighten
Hose
Clamps
N
E
W
S
Assembly Instructions, Side-of-Pole Mount for 2 Modules (SPM2) For Module Types E, F, G, & H (Version 1, Rev A)