Installation Guide

Step 4: Attaching Second Half of Expandable Struts to Rails

The second half of the Expandable Struts are secured to the attachment points of the

Rails (a, b, or c) using 3/8 x 1 hex bolts and hardware. (See Figures 1-1, 1-2 and

4-1)

A. Using the corresponding attachment point that sets the desired tilt, attach the

Struts as shown in Figure 4-1. Secure with one 3/8 x 1 hex bolt, lock

washer, flat washers, and Hex Nut, and finger tighten for now.

Figure 4-1: Attaching Second Half of Expandable Struts to Rails

8 of 10

Rail (Right)

Upper Pole

Channel

3/8

Hex

Nut

3/8 x 1

Hex Bolt

Lock

Washer

Expandable Strut

(one of two parts)

Flat

Washer

Flat

Washer

Attachment

Points

( , , or )ab c

Assembly Instructions, Side-of-Pole Mount for 2 Modules (SPM2) For Module Types E, F, G, & H (Version 1, Rev A)