User's Manual

3617VisionNet M505N
SECTION 2.7 CREATING AN ETHERNET INTERFACE
Abstract
This section will demonstrate the creation of an Ethernet nterface, most commonly used for VDSL2 Operation.
This section will not explain, in detail, the various Ethernet based options; as this must be specified by an ISPs Network
Operations Center and OSP Manager.
Step 1 Direct your browser to the WAN IF: Ethernet page
1.A In the left-hand navigation pane, select:
WAN
WAN IF: ETHERNET
Step 2 Create an Ethernet Interface
2.A Select “Add”
Notes:
You must remove, and rebuild, an interface if
you would like to change parameters.
Associated WAN Services must be removed,
before an interface may be removed.
2.B Select Ethernet Port
Notes:
It is strongly suggested that the “Omni-Port”
be used for WAN Operation.
The option to use another port if available, in
the event that another
2.C Select “Apply / Save”
Page of User Manual Rev 0.1e