User's Manual
Table Of Contents
- FOREWORD
- 1. SAFETY GUIDE
- 2.DEVICE DESCRIPTION
- 3.INSTRUCTIONS OF USE
- 3.1 Recharging the Pain Therapy Device.
- 3.2 To insert the Pain Therapy Device onto the Ele
- 3.3 To operate the Pain Therapy Device directly or
- 3.4 To prepare the different electrodes to use wit
- 1. Ankle & Foot Therapy Electrodes
- 2.Ankle Therapy Electrodes
- 3.Calf Circulation Promoter Electrodes
- 4.Knee Therapy Electrodes
- 5.Shoulder Therapy Electrodes
- 6.Elbow Therapy Electrodes
- 7.Hand & Thumb Therapy Electrodes
- 8.Knee Band with Electrodes (Fabric type)
- 9.Belt Electrodes I
- 10.Belt Electrodes II
- 11.Backrest Electrodes
- 12.Neck Comforter Electrodes
- 13.Neck Support Brace Electrodes
- 14.Circulation Promoter Pro (CP-Pro)
- 15.Large and Small Patch Electrode
- 16.Pain Therapy Belt with Electrodes (Fabric type)
- 17.Arm Band with Electrodes (Fabric type)
- 18.Triple Action Back Belt with Electrodes (Fabric ty
- 19.Leg Rests with Electrodes - I (Fabric type)
- 20.Leg Rest with Electrodes - II (Fabric type)
- 21.Knee Band with Electrodes (Fabric type)
- 22.Neck Therapy Pro - I
- 23.Neck Therapy Pro - II
- 24.Neck Therapy Pro - IV
- 25.Perfect Back Relief system with Electrodes
- 26.Pain Therapy Shirt
- 3.5 Operation details
- 3.6 Electrode Pads Guideline
- 4.CLEANING AND MAINTENANCE
- 5.STORAGE
- 6. TROUBLE SHOOTING
- 7. DISPOSAL
- 8. WARRANTY CARD
- 9. LABEL SYMBOLS
- 10. ELECTROMAGNETIC COMPATIBILITY
Pain Therapy Device, Models: P.T.S-X User Manual
File No. XB-UM-X-001
Guangzhou Xinbo Electronic Co., Ltd. Page
22
of
83
Pulse Duration
170µs
Pulse frequency
1.85~136 Hz
Net Charge (per pulse)
0µC @ 500Ω,
Method: Balanced waveform
Maximum Phase Charge
27.2 µC @ 500Ω
Maximum Average Current
1.79 mA @ 500Ω
Maximum Current Density (r.m.s)
7.37 mA/cm
2
@ 500Ω
Maximum Average Power Density
0.1219 mW/cm² @ 500Ω
Additional Specification
Operating Environment
Temperature: 5~40°C
Humidity: ≤80%RH
Atmospheric Pressure: 86~106kPa
Storage Environment
Temperature:
Main Unit: -20 ~ 55°C
Electrode: 5~40°C
Humidity: ≤95% RH
Atmospheric Pressure: 50~106 kPa
3. INSTRUCTIONS OF USE
3.1 Recharging the Pain Therapy Device.
If needed, recharge the Pain Therapy Device with the power adapter included with your
system. Charging time is approximately 2 hours. Do not use other power adapters except
the one included in your system, or it can damage the device.
When fully charged, the device can be used continuously for approximately 5 hours.
When the battery is drained, the indicator light will flash 3 times, and the device will then
shut down automatically.