User's Manual
Table Of Contents
- FOREWORD
- 1. SAFETY GUIDE
- 2.DEVICE DESCRIPTION
- 3.INSTRUCTIONS OF USE
- 3.1 Recharging the Pain Therapy Device.
- 3.2 To insert the Pain Therapy Device onto the Ele
- 3.3 To operate the Pain Therapy Device directly or
- 3.4 To prepare the different electrodes to use wit
- 1. Ankle & Foot Therapy Electrodes
- 2.Ankle Therapy Electrodes
- 3.Calf Circulation Promoter Electrodes
- 4.Knee Therapy Electrodes
- 5.Shoulder Therapy Electrodes
- 6.Elbow Therapy Electrodes
- 7.Hand & Thumb Therapy Electrodes
- 8.Knee Band with Electrodes (Fabric type)
- 9.Belt Electrodes I
- 10.Belt Electrodes II
- 11.Backrest Electrodes
- 12.Neck Comforter Electrodes
- 13.Neck Support Brace Electrodes
- 14.Circulation Promoter Pro (CP-Pro)
- 15.Large and Small Patch Electrode
- 16.Pain Therapy Belt with Electrodes (Fabric type)
- 17.Arm Band with Electrodes (Fabric type)
- 18.Triple Action Back Belt with Electrodes (Fabric ty
- 19.Leg Rests with Electrodes - I (Fabric type)
- 20.Leg Rest with Electrodes - II (Fabric type)
- 21.Knee Band with Electrodes (Fabric type)
- 22.Neck Therapy Pro - I
- 23.Neck Therapy Pro - II
- 24.Neck Therapy Pro - IV
- 25.Perfect Back Relief system with Electrodes
- 26.Pain Therapy Shirt
- 3.5 Operation details
- 3.6 Electrode Pads Guideline
- 4.CLEANING AND MAINTENANCE
- 5.STORAGE
- 6. TROUBLE SHOOTING
- 7. DISPOSAL
- 8. WARRANTY CARD
- 9. LABEL SYMBOLS
- 10. ELECTROMAGNETIC COMPATIBILITY
Pain Therapy Device, Models: P.T.S-X User Manual
File No. XB-UM-X-001
Guangzhou Xinbo Electronic Co., Ltd. Page
69
of
83
Insert the Pain Therapy device onto the harness on the shirt and rotate it to the fixed
position. There are 2 fixed positions in the harness for the device, one for treating your
upper shoulders, the second one for treating your lower back.
Turn power ON the Pain Therapy Device by holding down the (M) button for 1~2 seconds,
then use the remote control to adjust the intensity to your comfort level and enjoy.
3.5 Operation details
1. Insert the Pain Therapy Device and rotate it to fixed position on the electrode.
2. Power ON: Hold the (M) button on the device for 1~2 seconds to power ON, see
green indicator light ON.
3. Select the mode: The device has 3 modes of therapy, 1, 2 and 3. Press the (M)
button on the device or on the remote control once will change it to mode 2. Press
the (M) button again to change to mode 3.
4. Adjust the intensity: Increase/Decrease the intensity of the stimulation by pressing
the (+) or (-) button on the device or on the remote control.
5. Power off: Hold the (M) button on the device for 1~2 seconds to power OFF, see
green indicator light OFF.
6. Note: If the green indicator light begins to flash and beep, check if the device is
inserted properly in the device harness and check if the electrodes are firmly
connected to bare skin.
7. Automatic Time Out: The default time of the Pain Therapy Device is 20 minutes. After
20 minutes, the Pain Therapy Device will go into a Standby mode with yellow
indicator light On. After one minute of inactivity by the User, the device will turn OFF
automatically.
8. Low battery and charging: A pink indicator light will flash when the battery is low.
When charging, a white indicator light will be on, when fully charged, the white
indicator light will turn off.