Full Product Manual

8. Hook the unit to the mounting bracket and let the unit hang from

the mounting bracket.

9. Insert the screw through the mounting bracket and the heater

handle, and tighten the nut.

10. Loosen the screw to remove the wiring compartment/connection

cover in the rear of the heater.

11. Run the electrical power supply cable in flexible conduit and

connect to the wiring compartment via the knock-out at the back

of the unit.

12. Make the connections properly with connectors suitable for the

conductor size, including grounding wiring. After making the

connections, arrange the pigtail leads of unit and power supply

wires in the wiring compartment.