Operation Manual

13
Please note!
Waste Disposal Law of 27 August 1986
Tanning tubes require separate disposal measures
as hazardous waste materials.
Local communities provide for disposal of tubes
from private homes and commercial enterprises at
designated hazardous-waste collection points.
Tubes must be delivered intact for disposal.
Service address:
DR. KERN GmbH
Adolf-Weiß-Straße 43
35759 Driedorf, Germany
Tel. +49 (0)2775 82-240
Fax +49 (0)2775 82-455
servicecenter@dr-kern.de
www.dr-kern.de
Please keep this address in a safe place together with the
installation guide.
To help us answer your questions quickly and competently,
please provide data printed on the ID plate, to include
system type, article no. and serial no., in all inquiries.
$
Guarantee
The guarantee is taken over according to the legal regulations
at present.
Manufacturers warranty
The period of warranty starts from the date of purchase and
lasts upto 12 months.
- Always include the completed warrenty certificate when
returning equipment.
- The warranty expires for appliances which have been
modified without manufacturers explicit agreement.
- Damages caused by incorrect operation or handling through
non-authorized persons are not covered under the terms of
warranty.
- In the event of a claim, please indicate the serial number as
well as the article code number and type name with ex-
pressive description of the fault.
- This warranty covers damaged parts but no defects due to
wear and tear.
In case of complaint please return the equipment in its original
packaging or other suitable packaging (caution: danger of
transport damage) to our service department.
Always include the completed warranty certificate when
returning equipment. Possible shipping costs arising from the
transport to and from point of repair cannot be borne by us.
Always include the completed warranty certificate when
returning equipment.
Outside of Germany please contact your specialist dealer in
case of warranty claims. Direct warranty processing with our
service department is in this case not possible.
Equipment start-up date:
Stamp and signature of the authorized electrician: