Operation Manual

9
Fig. 25
ON/OFF
8.8.
ÀÁ ÄÃÂ
Fig. 24
Fig. 23
Connect the main power cable to the mains power source
using a fixed connection or a plug connection (CECON
plug).
The system is now ready for operation.
Fig. 22
41
40
39
The tanning unit will be switched on by using the On/Off-
switch À (fig. ) at the digital-timer.
With the keys à and Ä (fig. 25) you can select your tanning
time (max. 30 minutes).
Ä= up, Ã=down
After loose of time the digital timer of the tanning unit switches
off automatically.
After tanning session the unit is switching over to after
cooling mode for 3 minutes.
Operation
Attention: The switches Á and  are inoperable
in this tanning appliance.
Operation via external timer control
Further on you can use your tanning unit via external
timer control (e.g. coin box). The connection is to be made
according to the following wiring diagram.
Please pay attention, that a control line for the fan delay
has to be available in either case.
The connection line between the application and the
external timer control is inducted into the appliance
besides the main connection line and applied to the
connection terminal (fig.26).