Quick Start Guide

- 10 -

Robot Operations

Robot Control Program

Step 1: If you have not installed the demo and support programs, insert the

installation CD to CDROM and run the “Setup.exe” program that is under

“Scout Control Installation” folder.

Step 2: Connect the PC to the wireless router (one of the LAN ports) (the

router has IP 192.168.0.200) included in the package.

Step 3: Push red power switch on the front to turn on the robot.

Step 4: Run the “DrRobotScoutControl.exe” from Start -> All Programs -> Dr

Robot Inc -> Scout Control, and then click “Connect Robot”.

Two gateway programs will be called up to establish communication connections with the electronic system on

the robot.

Robot ID

Robot WiFi module 1 IP

Robot WiFi module 2 IP

Camera IP

Camera Port Number

Camera User ID

Camera Password