Quick Start Guide

Copyright © 2001-2010, Dr Robot Inc. All Rights Reserved. www.DrRobot.com
- 15 -
Manual path test tool:
1. Open the path file, via
points on the path will be
displayed on the display
above; via points can be
manually modified.
2. Select the type of task
that robot to accomplish
with the selected path:
a. P2P task – robot will run
from the first via point on
the path to the last one and
stop
b. Wander task – robot
actually don’t use the path,
and runs on its own.
Map displaying robot
location and via
p
oints
Once checked, a via point will be
generated and shown in the via point
display above when the mouse clicks on
the map below. Robot will drive to this
point when the GO button is clicked
Zooming in/out
of the ma
p
This will bring up a tool called “Path
Editor” allowin
g
y
ou to edit a
p
ath
Via points displayed here. Via points can be
manuall
y
modified here.