Quick Start Guide

- 8 -

Operation Scenario

Diagram below shows the typical operation scenario. The Scout Pro is a wireless networked robot. It connects to

the wireless AP or router via IEEE 802.11b/g network. The host PC (or called server PC) running the Scout

Control program could connect to this network via either:

Network cable – Connect the host PC to one of the LAN ports on the back of the router (DO NOT connect to the

WAN port), or

Wireless – To connect the Local PC to the wireless router, configure the Local PC’s wireless settings using the

default wireless configuration settings found in the Network Connection session of this manual.

Typical Operation Scenario

Note: The Local PC could also be mounted on the robot instead off the robot if your application requires so.

User could be able to control the robot, see, talk and listen through the robot via the Dr Robot

® Control program.

User could write his own remote control program

or contact

support@DrRobot.com for

further support.