Operating instructions

16 16.50 PRO DR

RAPID-FEED™ CHIPPER

Attaching the Hopper Assembly

NOTE: We recommend that you have someone help you lift the

Hopper in place and support it until it is secured to the Chipper.

Tools Needed:

• Two 1/2" Wrenches

1. Attach the Hopper Assembly to the Chipper with six

5/16"-18 x 1" Bolts, twelve Flat Washers (one Washer

on Bolt side and one on Lock Nut side) and six Nylon

Lock Nuts (Figure 7).

NOTE: Install hardware with Bolt Head on the top side.

Attaching the Discharge Chute

Tools Needed:

• Two 1/2" Wrenches

1. Position the Discharge Chute as shown and secure

with two 5/16-18 x 5-1/4" Bolts and Nylon Locknuts

(Figure 8).

Attaching the Hitch Plate

Tools Needed:

• Two 1/2" Wrenches

1. Position the Hitch Plate onto the Tongue Assembly as

shown and secure with two 5/16-18 x 1" Bolts and

Nylon Locknuts (Figure 9).

Hopper

Hardware

Hopper

Assembly

ure 7

ure 8

Discharge

Chute

Bolts and

Locknuts

Tongue

Assembly

Hardware

Hitch

Plate

Figure 9