User guide

Bluetooth
2G. Bluetooth 105
3. On the Settings tab ( ), tap Add a device.
4. Select the hands-free or stereo headset device in the list, and then tap
Select. Your
device will automatically connect with the Bluetooth headset.
5. When connected, the hands-free or stereo headset device is shown on the screen,
including the Bluetooth services (Hands-free and Stereo Audio) that you can use with it.
Make sure these services are selected, and then tap
Done.
The paired headset now appears in the Devices tab ( ).
The double arrowhead ( ) that is displayed to the right of a service indicates that the
service is connected with your headset. If you turn off your headset, the double arrowhead
disappears to indicate that the service has been disconnected. Next time you turn on and
use your headset again, you need to manually reconnect each service. Tap a service and
then tap
Connect.
Note
Your device will automatically try one of the preconfigured passcodes (0000, 8888) to pair
with the Bluetooth headset. If this fails, you have to manually enter the passcode delivered
with your headset.