User guide

132 2I. Managing Your Device
To choose how to be notified about events or actions:
1. Tap
Start > Settings > Sound. and then tap Advanced.
2. On the
Sounds tab, choose how you want to be notified by selecting the appropriate
check boxes.
3. On the
Notifications tab, in Event, tap an event name and choose how you want to be
notified by selecting the appropriate check boxes. You can choose from several options,
such as a special sound, a message, or a flashing light.
Resetting Your Device
Soft Reset
Occasionally, you may need to reset your device. A soft (or normal) reset of your device
clears all active program memory and shuts down all active programs. This can be useful
when your device is running slower than normal, or a program is not performing properly. A
soft reset is also necessary after the installation of some programs. If a soft reset is performed
when programs are running, unsaved work will be lost.
To perform a soft reset:
1. Pull out the stylus.
2. Remove the back cover. For instructions, see step 1 in “Installing the Battery” on page 3.
Tips
• Turning off sound notifications helps conserve battery power.
• The types of notifications that can be enabled depend on the event. For instance, only
Play
sound and Vibrate notifications can be enabled if it is an ActiveSync event.
• Flashing light notification is either enabled or disabled., depending on the type of event. This
setting is preconfigured and cannot be changed.