User guide

134 2I. Managing Your Device
To perform a hard reset:
1. With the device turned off, press and hold the
Ta lk and End keys first, and then press and
hold the
Power button until you see the following message on the screen:
2. Release the
Ta lk key, End key, and Power button.
3. Press the
Volume Up button to restore the device to factory default status.
– or –
Pess any other front panel key to cancel the hard reset and just power on the device.
Clearing Storage
If you can access the device settings, you can use Clear Storage to reset your device back to
factory default settings.
1. Tap
Start > Settings > All Settings.
2. On the
System tab, tap Clear Storage.
3. Enter “
1234 ” and then tap Yes.
This operation will delete
all your personal data,
and reset all settings to
manufacturer default.
Press VolUp to restore
manufacturer default, or
press other keys to cancel.