User guide

158 3B. Web and Data Services
Connecting to Data Services from the Comm Manager
1. Do one of the following to open the Comm Manager:
䡲 Tap Start > Settings > Communications.
— or —
䡲 Tap Start > All Programs > Comm Manager.
— or —
䡲 Tap Start > Settings > All Settings > Connections tab > Comm Manager.
2. Tap
Data Connection. The ON/OFF switch turns yellow and the switch is in the ON position
when your device is connected to data services.
Data Connection Status Icons
Your device displays the current status of your data connection through status icons at the
top of the screen. The following symbols are used for data connections:
If none of the above status icons are displayed, your device does not have a current data
connection. To launch a connection, see “Connecting to Data Services” on page 156.
or
A high-speed connection to the Sprint Mobile Broadband network
(EVDO) or a Sprint 1xRTT data connection is available. These
icons in conjunction with the data connection icons below let you
know what type of connection your device is using.
, , , or
An HSDPA, 3G, GPRS or EDGE network connection when you are
roaming internationally.
Your device has an active connection to the Sprint Mobile
Broadband (EVDO), Sprint 1xRTT data network, or a 3G/GPRS/
EDGE international network. When active, data is being transferred
and you cannot receive calls.
Your device’s data connection is idle. You can receive
incoming calls.