Operating instructions

22 DR
®
WIDE-CUT LAWN MOWER
Figure 11
Adjusting the Cutting Height
ALWAYS DISENGAGE THE BLADES OF THE DR WIDE-CUT LAWN MOWER BEFORE ADJUSTING THE
CUTTING HEIGHT.
You can adjust the cutting height in 1/2" increments by repositioning the Cutting Height Adjustment Lever on
the right side of the Lawn Deck (
Figure 11). Your DR WIDE-CUT LAWN MOWER is fitted with a Clevis Pin to
prevent accidental dislodging of the Cutting Height Adjustment Lever over rough terrain. To change height
settings, remove the Clevis Pin and re-position the Cutting Height Adjustment Lever to the desired cutting
height (
Figure 11). After adjusting to a new height, re-insert the Clevis Pin on the appropriate side of the
Adjustment Lever in the new position (
Figure 11).
Clevis Pin
Cutting Height
A
djustment Lever
Clevis Pin location for Cutting
Heights 2", 3" and 4".
Clevis Pin location for Cutting
Heights 2.5", 3.5" and 4.5".