User Manual

Establishing a wireless connection
Dräger X-zone 5500 53
4.2.6 Terminating group
1. Press the key on the main device to open the menu.
2. Select and confirm .
3. Select and confirm to ungroup the group.
Display on main and group devices:
Grouping LED: off.
4.2.7 Provisionally disabling group monitoring
If group monitoring is provisionally disabled, the associated
alarm function is provisionally disabled as a result. The
connection status display and the group assignment for the
devices are retained.
To disable the group monitoring provisionally:
1. Form group with closed wireless network.
2. Press the key on the main device to open the menu.
3. Select and confirm .
4. Select and confirm to disable the group monitoring
provisionally.
 Group monitoring is disabled.
Group monitoring is automatically activated 15 minutes after
provisional deactivation or after switching on grouped devices.
This interval is shown as follows:
 For the first 13 minutes the communication LED flashes
slowly.
 For the last 2 minutes the communication LED flashes
quickly.
4.2.8 Activating group monitoring
1. Form group with closed wireless network.
2. Press the key on the main device to open the menu.
3. Select and confirm .
4. Select and confirm to activate the group monitoring.
 Group monitoring is activated.
4.2.9 Terminating group in an alarm situation
If the main device can no longer be found for a group device
(communication LED flashes red), the grouping for this device
can be cleared.
To ungroup the group:
1. Press the key on the group device to open the menu.
2. Select and confirm .
3. Select and confirm to delete the group affiliation.
or
 Press key on the group device for a long time.
 Group affiliation is deleted.
4.2.10 Open quick menu of the X-am 5x00
Use this function to open the quick menu of the X-am 5x00
To open the quick menu:
1. Press the key to open the menu.
2. Select Quick to display the quick menu of the X-am
5x00.
4.2.11 Open status indicator from external module
1. Press the key on the main device to open the menu.
2. Select Modbus to
display the status indicator.
Legend:
1 Equipment name
2 GSM signal strength
3 Phone number
4 Connection to the X-zone
5 GPS position
6 Email (enabled)
7 SMS (disabled)
8 Cloud (enabled)
NOTICE
The gas alarms remain displayed if group monitoring is
disabled.
OK
04333112.eps
ARCL-0144
OK
i
i
NOTICE
This function is only available if the Modbus function
using the PC software CC-Vision has been enabled.
OK
OK
OK
i
i
OK
05933112.eps
xxxxxxxxx
GPS
Modbus
5
4
7
1
3
2
86