User's Manual

www.dragino.com
RS485 to LoRaWAN Converter User Manual 26 / 30
Button Feature
ACT If RS485 joined in network, press this button for more than 1 second,
RS485 will upload a packet, and the SYS LED will give a Blue blink
RST Reboot RS485
PRO Use for upload image, see How to Update Image
3.7 LEDs
LEDs Feature
PWR Always on if there is power
SYS After device is powered on, the SYS will fast blink in GREEN for 5
times, means RS485-LN start to join LoRaWAN network. If join
success, SYS will be on GREEN for 5 seconds. SYS will blink Blue on
every upload and blink Green once receive a downlink message.