User's Manual

www.dragino.com
RS485 to LoRaWAN Converter User Manual 27 / 30
4. Case Study
User can check this URL for some case studies.
http://wiki.dragino.com/index.php?title=APP_RS485_COMMUNICATE_WITH_SENSORS
5. Use AT Command
5.1 Access AT Command
RS485-LN supports AT Command set. User can use a USB to TTL adapter plus the 3.5mm Program
Cable to connect to RS485-LN to use AT command, as below.
In PC, User needs to set serial tool(such as putty, SecureCRT) baud rate to 9600 to access to
access serial console of RS485-LN. The default password is 123456, or 0 if upgrade from old
version. Below is the output for reference: