User's Manual

Description

Version 1.0

Required Action Steps

set unlicensed frequencies

rx [index]

Sets the frequency to CUSTOM (decoupled) frequencies for receive (Rx)

direction.

Note: the transmit (Tx) and receive (Rx) frequencies must differ by

at least 70 MHz.

Sequence:

set unlicensed frequencies Rx [index] press Enter

where

Rx is the receive direction.

Index is the index number of the frequency.

The system responds: (example uses custom unlicensed

frequencies)

Index TX IF RX IF TX RF RX RF

CUSTOM 670 1980 24080 24170

Note: All Frequencies in MHz.

get unlicensed frequencies

Displays the bank of CUSTOM transmit (Tx) frequencies available for

use.

Sequence:

get unlicensed frequencies Tx press Enter

The system responds: (example uses Tx frequencies)

Index TX IF TX RF

CUSTOM1 670 24080

CUSTOM2 660 24090

CUSTOM3 650 24100

CUSTOM4 640 24110

CUSTOM5 630 24120

CUSTOM6 620 24130

CUSTOM7 610 24140

CUSTOM8 600 24150

CUSTOM9 590 24160

CUSTOM10 580 24170

CUSTOM11 570 24180

CUSTOM12 560 24190

CUSTOM13 550 24200

CUSTOM14 540 24210

CUSTOM15 530 24220

Note: All Frequencies in MHz.