User's Manual

Installation of Radio and Antenna
39
Version 1.0
6.2. Visually-aligning Radios
This section describes how to visually align the radios.
Procedure 6-2
Visually align the radios
Perform this procedure to visually align the radios.
1. Visually align the radios to each other. Be as accurate as possible.
2. Visually align one end of the point-to-point link. Repeat this procedure for the
other end.
3. Place a mark on the radio bracket to identify the starting point before you
begin to fine-tune the radio alignment.
Figure 6-1
Modem on Mounting Bracket
Procedure 6-3
Attaching the Modem to Mounting Bracket
Perform this procedure to attach the modem to the mounting bracket:
1. Install the mounting bracket onto the mast.
2. Install the modem onto the bracket. Make sure the modem is mounted above
the antenna so there is sufficient cable length.
3. Ensure all hardware is tightened according to the following torque
specifications.