Manualshelf

User's Manual

ManualsBrandsDragonWave ManualsElectronics24 GHz Air Pair Point-Point Radio Unit
51525354555657585960
Installation of Radio and Antenna
43
Version 1.0
Figure 6-5
24 GHz system with 36” antenna mounted
Procedure 6-4
Connecting the IF and RS-232 cable to the modem and radio
Perform this procedure to connect the IF and RS-232 cable to the modem and
radio.
1. Connect IF cable to the IF connector on the modem and the radio.
2. Connect the RS-232 cable to the serial connector on the modem and the
radio.
Note: Do NOT connect the Power cable or the CAT5 Ethernet cable to LAN
equipment at this time.