User's Manual

List of Procedures
vii
List of Procedures
Procedure 4-1 Configuring the Serial Port using the CLI......................................... 13
Procedure 4-2 Create Login Account........................................................................... 16
Procedure 4-3 Set AirPair Frequency available and Transmit Power...................... 18
Procedure 4-4 Setting the 24GHz AirPair Frequency channels for user-defined
custom frequency pairs.......................................................................................... 23
Procedure 4-5 Setting the IP Address......................................................................... 30
Procedure 4-6 Setting VLAN Tag................................................................................. 33
Procedure 6-1 Mounting the 12″and 18″ antennas..................................................... 37
Procedure 6-2 Visually align the radios....................................................................... 39
Procedure 6-3 Attaching the Modem to Mounting Bracket....................................... 39
Procedure 6-4 Connecting the IF and RS-232 cable to the modem and radio ........ 43
Procedure 6-5 Connect the power cable to the modem and the power pack ......... 45
Procedure 6-6 Fine-adjust Align Radios ...................................................................... 51
Procedure 6-7 Perform a data test................................................................................ 53
Procedure 7-1 Setting up SNMP.................................................................................... 55
Procedure 7-2 Enable traps........................................................................................... 57