User's Manual

Appendix A 71
Horizon Compact Release 1.01.01 Wireless Ethernet Product User Manual – Volume 1
get system redundancy
get telnet access
get traffic statistics
get transmit power
get unique peer authentication key
get user accounts
get user session
get vlan tag
get vlan tagging
get web server
kill ssh sessions
list [ftp:file/directory/]
lo
ping [-w timeout][-n count][-t][ip address]
reset [system / modem]
save config [ftp:filename]
save log [ftp:filename]
save mib
save performance log [ftp:filename]
save users [ftp:filename]
set aam [on/off]
set admin user
set air interface authentication type [type]
set authentication failure [action]
set alarms counter [0]
set alignment [on/off]
set antenna diameter [index of diameter]
set atpc [on|off][coordinated power]
set bandwidth utilization threshold [threshold][time]
set cos default value [0-7]
set cos expedite queue [on|off]
set cos qinq itag [protocol id]
set cos qinq otag [protocol id]
set cos queue cir [0-100,0-100,0-100,1-100]
set cos queue mapping [mapping]
set cos queue cbs
set cos type [cos_vlan][cos_qinq_itag][cos_qinq_otag]
set current channel index
set date time [dd/mm/yyyy hh:mm:ss:ms]
set default gateway [ip address]
set dropped frames threshold [threshold][time]
set enet config [port1|port2]
set enet speed [port1|port2] speed[10|100|1000|auto]
AutoNeg[auto]
set frequency bank
set group authentication key [key]
set http secure access [Admin|Noc|Super] [on|off]
set ip address [address]
set logging [on|off]
set maximum frame size [1600-9600]
set network management interface [port1|port2|port2
extended ]
set network protocol strict [on|off]
set noc user
set optical transmitter state [on|off]
set pause state [on|off]
set performance logging [on|off]
set performance log interval [hr:min:sec]
set programmed frequency [index]
set qos [on|off]
set radio transmitt er state [enable|disable]
set radio band [band]
set radio loopback [on|off]
set radio rxgain
set radio txgain
set radius server key [index] [key]
set radius server host [index] [ip address]
set radius super user authentication strict [on|off]
set redundancy link monitor parameters
set redundancy mode
set redundancy override [primary|secondary|
manual|auto]
set redundancy standby enet state [on/off/pulse]
set redundancy state switch [on]
set rls [on|off]
set rls link enable [on|off]
set rls link monitor parameters [dn2up frame error]
[up2dn frame error] [dn2up samples] [up2dn samples]
[sample time]
set rls link control [on|off]
set rls make rsl [rsl value][time]
set rls signal fault parameters [time][% error]
set rsl threshol d [threshold][time]
set snmp access mode [v1|v2c|off]
set snmp manager [mgr index] [ip address]
[enable|disable] [community string]
set snmp set request [on|off]
set snmp trap [trap#] [enable|disable]
set snmp trap host [host#] [ip address]
[enable|disable] [community string]
set snr threshold [threshold]
set snmpv3 trap host enable [index]
set snmpv3 trap host disable [index]
set snmpv3 trap host ip [index] [ip address]
set snmpv3 trap host user [index] [none|des]
set snmpv3 trap host authentication [indes]
[none|md5|sha] [passwd]
set snmpv3 trap host privacy [index] [none|des]
set sntp [on|off]
set sntp default
set sntp offset [hrs]
set sntp server [index] [ip address]
set ssh server
set super user [username] [password]
set system current speed [speed]
set system mode [mode]
set system redundancy [on|off]
set telnet [on|off]
set traffic statistics [0]
set transmit power [power in dB]
set unique peer authentication key [key]
set subnet mask [mask]
set vlan tag [vlan ID (0 -4095)] [vlan priority (0-7)]
set vlan tagging [on|off]
set web server [on|off]
upgrade system licensed speed [speed] [key]