User's Manual

DragonWave Inc.
108
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
17.5.5 Home Screen
The Horizon Compact Plus Web interface runs in a standard Web browser.
Figure 17-2 Web Interface - Home Screen
The Link View Bar Managed Node buttons switch management access between the Peer or Local
Horizon Compact Plus nodes. In addition, a graphic view of the radio link and a real time status table for
both ends of the link can be selected for viewing.
The Information Pane displays information related to the node being managed. Selecting either of the
System Summary, System Features, Software and Hardware Inventory tabs reveals related information
for the node being managed.
The System Navigation Tree provides access to all web configurable features for the node being
managed.
To ensure that any changes that have been made to the system configuration are properly saved, you will
need to click on the Save Config button. Some features also need the Reset System button to be
clicked before changes become effective (this is traffic affecting). For some features that would normally
require a Reset System, there is also the option to have any changes take effect immediately (not traffic
affecting). Incorrectly applying these changes may result in a failed wireless link. Care must be taken to
ensure that communication to the peer link is not broken if management of the peer link is still required to
be performed over the wireless link after changes have been made.
WARNING:
Changing these features may be used to change the radio configuration of an
existing working link. If management of the far end Horizon Compact Plus is
only via the radio link, then configure the far end radio first. Otherwise, if you
configure the near end radio first, you will lose the link to the far end radio and
be unable to manage or configure it.