User's Manual

DragonWave Inc.
116
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
17.6.4 Enabling SSL per User Group
Web interface access for each user group may be configured so that SSL use is mandatory. If the use
of SSL is not mandatory for a user group then that group can choose between standard HTTP access
and HTTPS (SSL) access. For example, SSL may be made mandatory for all Noc and Admin level
users, but not required for the Super User.
Procedure 17-7
Configure Mandatory SSL Access for Each User Group
Perform this procedure to configure mandatory SSL access to the Horizon Compact Plus modem for each
user group.
Note: To perform this procedure, you must have Super User rights.
Required Action
Steps
login
Log in as the Super User.
get http secure access status
Displays the status of the user group's mandatory SSL access to the
Horizon's Web interface. If the secure access is not required then
users may access the Web interface both through standard HTTP and
through HTTPS (SSL).
Sequence:
get http secure access [user group] press Enter
where [user group] is one of: Super, Noc, Admin
Note: [user group] is case sensitive.
The system responds:
The HTTP Secure access for [user group] users is [not
enabled/enabled]
Example:
The HTTP Secure access for Noc users is not enabled.
set http secure access
Sets the SSL access to mandatory for the selected user group. Once
set, the user group must access the Horizon Compact Plus Web
interface using HTTPS (SSL). Standard Web access through HTTP
will be restricted for that user group.
Sequence:
set http secure access [user group] [on/off] press Enter
The system responds:
The HTTP secure access is set successfully.
save mib
Saves the MIB to RAM. Perform this command save setting changes
to non-volatile memory.
Sequence:
save mib press Enter
The system responds:
MIB saved successfully.