User's Manual

DragonWave Inc.
120
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Procedure 18-2
Performance Log
Required Action
Steps
login using NOC account
Log in as a NOC account
View performance logging
Returns the status of performance logging
Sequence :
get performance logging press Enter
The system responds :
Performance Logging has been :[enabled/disabled.]
Configure performance
logging
Allows you to enable or disable performance logging
Sequence :
set performance logging [on/off] press Enter
The system responds :
Performance Logging is :[on/off]
Configure performance log
interval
Sets the time interval between performance log updates
Sequence :
set performance log interval hh:mm:ss press Enter
Where hh is in hours, mm is in minutes and ss is in seconds. Note
that the maximum interval allowed is 24 hours and the minimum is 15
seconds. The default setting is 15 minutes. See
for log durations for different intervals.
The system responds :
The performance logging interval is set to: hh:mm:ss
View performance log
This command lists all performance entries in the log since the log
was enabled, or after it was last cleared. Ctrl-c aborts the listing.
Sequence :
get performance log press Enter
The system responds :
Start of Performance log ...
SNR Eb/No RSL Temp Avg.BW PeakBW
1 06/21/2007 13:15:09 0 526172 I 8.71 6.08 -44.88 30.5 68 85
1 06/21/2007 12:29:56 0 526171 I 8.32 5.69 -44.75 30.6 66 90
End of Performance log.
erase performance log
Erases the performance log
Sequence :
erase performance log press Enter
The system responds :
Erased log successfully.