User's Manual

DragonWave Inc.
122
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
Changing the IP address of
a Syslog Server
If you want to change a Syslog Server IP address and the current
Syslog Server is already running, first turn off syslog forwarding.
Sequence :
set syslog forwarding host [new ip address] press Enter
The system responds :
Error : Could not update syslog server IP address because it is
currently turned ‘on’. Please turn ‘off’ and then change the IP
Address.
set syslog forwarding off press Enter
The system responds :
Set forwarding rule ‘off’
Syslog Forwarding Admin Status : off
Syslog Forwarding Oper Status : off (Admin state is ‘off’)
set syslog forwarding host [new IP address] press Enter
The system responds :
Successfully set syslog forwarding destination IP address to [new
IP address]
To turn on forwarding, execute ‘set syslog forwarding ‘on’.
set syslog forwarding on press Enter
The system responds :
Set forwarding rule ‘on’
Syslog Forwarding Admin Status : on
Syslog Forwarding Oper Status : off (waiting for first send request)
View syslog status
This command returns the status of the syslog server.
Sequence :
get syslog forwarding status press Enter
The system responds :
Syslog Forwarding Admin Status : on
Syslog Forwarding Oper Satus : on
View the IP address of the
syslog server
Use the following command to return the current syslog server IP
address.
Sequence :
get syslog forwarding host press Enter
The system responds :
Syslog Forwarding Host : [IP address]
Save changes to mib
Saves the MIB to RAM. Perform this command to save setting
changes to non-volatile memory.
Sequence:
save mib press Enter
The system responds:
MIB saved successfully.