User's Manual

Network Management
131
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
FOR SNMPv3 ONLY
Configure snmpv3
manager {1..5}
This command requires
the following prompts
to be answered.
user username
securityLevel
[noAuthNoPriv
authNoPriv | authPriv ]
[auth {md5 | sha |
none} auth-password]
[priv {DES | none}
priv-password]
This specifies an snmpv3 external user.
There may be up to 5 external SNMP managers configured in the system.
Each user should have unique name. The default security level for the
system is noAuthNoPriv.
The user is prompted with the current value for each option. User may
choose to keep or modify this entry by selecting y\n. For each prompt,
available options are shown.
Examples:
->set snmpv3 manager
Enter the entry number to modify [1-5]: 1
Current user Name for Entry [1] is [ ]
Do you accept this user name? [y|n]n
Enter Snmp V3 UserName :user1
New user Name for Entry [1] is set to [user1]
Current Authentication Protocol for Entry [1] is [NoAuth]
Do you accept this value? [y|n]n
Enter authentication protocol [0=NoAuth | 1=MD5 | 2=SHA]: 1
New authtentication protocol for Entry [1] is set to [MD5]
Current authentication password for entry [1] is [-]
Do you accept this value? [y|n]n
Enter authentication password: authpass
New authtentication password for Entry [1] is set to [authpass]
Current privacy Protocol for Entry [1] is [NoPriv]
Do you accept this value? [y|n]n
Enter privacy protocol [0=NoPriv | 1=DES ]: 1
New privacy protocol for Entry [1] is set to [DES]
Current privacy Password for Entry [1] is [-]
Do you accept this value? [y|n]n