User's Manual

Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
21.0 Editing System Configuration Files
Volume 1 of this manual describes how to upload and download system configuration files to an ftp
server. Downloading a configuration file to a system will allow that system to take on an identical
configuration as that of the system from which the configuration file was uploaded.
The configuration file is a text file written in SNMP OID=value format. This file can be edited in order to
make changes to the configuration of a system to which the file may be downloaded. Changing the
configuration involves changing the OID=value line(s) in the file.
An example of a partial configuration file is shown below:
The first line of the file contains an original hash value of the file and it should not be modified or
removed. Also, the header containing product information should not be removed.
The user may modify the OID=value lines in the file to configure a system, and any lines can be
commented out with “-- “ in front of a line.
If a value contains space(s) the whole OID=value should be within quotes. For example, to configure
COS CIR the OID=value should look like this:
"1.3.6.1.4.1.7262.2.5.6.6.0=12 12 12 12 12 12 12 16"
The index ID’s for various parameters can be found in Appendix B – System Configuration OID Indices.
See Volume 1 for the procedure to upload and download configuration files. Only the Super User can
upload or download configuration files.