User's Manual

Detailed CLI Command List
147
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
CLI Command
Description
get cos qinq itag
returns the protocol id of dot1q Q_in_Q inner tag.
get cos qinq otag
returns the protocol id of dot1q Q_in_Q outer tag.
get cos queue cbs
returns the committed burst size of the cos queues.
get cos queue cir
displays the CIR(Committed Information Rate) for user
traffic queues
get cos queue mapping
the table in the response to this command indicates the
assignment of dot1p cos value to user queue.
get cos type
returns the cos type.
get cos wfq weight
returns the cos wfq weight.
get date time
displays current Date and Time to the user.
get default gateway
gets the system default gateway.
get default ipconfig
displays default IP Configuration of the system.
get dropped frames threshold
returns the dropped frames threshold set by the user in %.
get dw access
displays the DW access.
get dynamic config change
returns the status (on/off) of the dynamic config change
feature.
get ecfm configuration-errors [vlan <vlan-
id(1-4094)>] [interface <interface-id>]
[switchname <context_name>]
Displays the ECFM configuration-related errors (CFM
leak, Conflicting VlanIds, Excessive Levels, etc).
get ecfm default-domain [switchname
<context_name>]
Displays the global Default-domain parameters along with
the modified parameters corresponding to a VLAN.
get ecfm domain [brief | domain-number(1-
32)] [switchname <context_name>]
Display information about the Ecfm maintenance domain.
get ecfm error-log [domain <domain-
name(1..20)> | levelid<level-id(0-7)>]
[unaware | vlan <vlan-id(1-4094)>]
[switchname <context_name>]
Displays the Error Log containing the information about
the errors encountered on the MEP.
get ecfm errors [domain <domain-
name(1..20)> | levelid <level-id(0-7)>]
[switchname <context_name>]
Display continuity check error conditions logged on a
device since it was last cleared.
get ecfm frame delay buffer [brief] [one-way
| two-way] [level <level-id(0-7)>][unaware |
vlan <vlan-id(1-4094)>] [interface
<interface-number>][mac <peer-mac-
address>]
Display the contents of the rolling buffer maintained for
Frame delaycalculations measured at various times.
get ecfm global information[switchname
<context_name>]
Displays ethernet CFM global information.
get ecfm loopback cache [brief] [level
<level-id(0-7)>][unaware | vlan <vlan-id(1-
4094)>]
Displays the Loopback transactions related information.