User's Manual

DragonWave Inc.
152
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
CLI Command
Description
get snmp set request
specifies whether SNMP 'v1' and 'v2c' 'Set' requests are
enabled.
get snmp trap hosts
returns the list of receivers of snmp traps.
get snmp traps
returns list of traps that are available in the system.
get snmpv3 managers
returns a list of managers that may access the system via
SNMP Version 3.
get snmpv3 trap hosts
returns the list of receivers of snmp traps in V3 mode.
get snr threshold
returns the SNR threshold.
get sntp
returns the SNTP status: whether it is on|off and the list of
SNTP servers
get sntp offset
returns the SNTP time offset in hours: the regional time
minus Greenwich Mean Time; used to calculate and set the
system time
get ssh server
returns the status of the SSH server.
get ssh server fingerprint
returns the SSH server fingerprint.
get ssl certificate status
returns if the SSL certificate has been created and if it's
valid for this IP address.
get subnet mask
gets the system subnet mask.
get super user
returns the Super Username and Password stored in the
system.
get sw inventory
displays Omni File inventory, stored in FLASH memory;
shows primary and backup software in FLASH.
get sw version
displays SW versions in the system.
get synce config
Returns the synchronous Ethernet configuration details
get synce status
Returns the status of synchronous Ethernet
get syslog forwarding host
displays the syslog forwarding host IP Address.
get syslog forwarding status
displays the syslog forwarding status. If 'on' then syslogs
are being sent to the specified host
get system mode
displays the system mode
get system speed
returns the speeds of system.
get system summary
displays system summary information
get telnet access
displays whether the Telnet Access is enabled or
disabled.
get traffic statistics
returns traffic statistics in the system.
get transmit power
returns the configured and actrual transmit power level for
the system.
get user accounts
displays both Admin and NOC user accounts to the user.
get user session
displays the LogIn status of the user.