User's Manual

DragonWave Inc.
156
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
CLI Command
Description
set ecfm mep crosscheck {on | off} levelid
<level-id | levellist> [vlan <vlan-id |
vlanlist>] [switchname <context_name>]
ON/OFF - Enables/Disables the cross-checking
functionality between the MEPs configured in the cross-
check list. defaults to ON. - Vlan if not specified,
enables or disables the cross-checking functionality
between the vlan unaware MEPs
set ecfm mep crosscheck mpid <integer(1-
8191)> [delete|define] [vlan <integer(1-
4094)>]
Statically defines maintenace end point(MEP) . (MEP is
defined in a list of MEPIDs of a service associated with a
provided VLAN) delete - Disables Linktrace replies (LTR)
caching. define - Enables Linktrace replies caching. If
neither 'delete' nor 'define' is specified, defaults to 'define'.
set ecfm mep crosscheck start-delay
{default}|{start-delay<3-100>}
To configure the number of CCMs to be missed, for which
a device waits for the remote maintenance end
points(MEPs) to come up. default: the number is reset to
the default value of 3.
set ecfm mep level [<0-7> [delete] [inward]
mpid <id(1-8191)> [vlan<vlan-id(1-4094)>]
[active]
Configures or deletes a Maintenance end point (MEP)
(Sets an port as a domain boundary (edge)by defining it as
a MEP), and sets direction for the MEP.) - a VLAN unaware
MEP can be configured by not specifying the vlan
parameter. - Active keyword defines the operational status
of MEP, by default a MEP is operationally active. - MEP
direction, if not specified would be outward(down).
set ecfm mep-capability level {<level-id(0-
7)> | level-list} [on|off] [vlan {<vlan-id(1-
4094)> | vlan-list}]([ping] [muliticast-ping]
[one-way-frame-delay] [multicast-test]
[turnaround-delay][ais] [rdi])
Enable (on) or disable (off) the capabilities of all the MEPs
in a MA at the level and vlan. Defaults to enable if on/off not
specified.
set ecfm mip ccm-database caching
{enable | disable}
Enable or disable Ethernet CFM MIP-CCM database
caching
set ecfm mip ccm-database hold-time
[<hours>(24-48)]
Sets the hold time for the ecfm ccm-database, in hours. If
not specified, the default is 24 hours
set ecfm mip ccm-database size
[<entries(1000-10000)>]
Sets the number of entries in the ecfm ccm-database, in
hours. If not specified, the default is 1000 entries
set ecfm mip dynamic evaluation
{enable|disable}
Enables or Disables the implicit evaluation and creation
of a MIP.
set ecfm mip level [delete] <level-id(0-7)>
vlan <vlan-id(1-4094)> [active]
Configures a Maintenance intermediate point (MIP) at the
specified level and vlan on an interface. active -
makes MIP operationally active, by default MIP is
configured as operationally active. delete - Deletes the
specified Maintenance Intermediate Point (MIP).
active keyword sets MIP to operationally inactive.
set ecfm mip-creation-criteria {none |
default | explicit}
Sets MIP creation criteria for the MIPs to be associated
with the Maintenance Domain.
set ecfm oui {<aa:aa:aa> | default}
Configure the Organization Unit Identifier (OUI). Default
sets the OUI to the Switch Base Mac address).
set ecfm port port<1-1> {on|off}
Sets the port number that subsequent ECFM commands
will apply to.