User's Manual

DragonWave Inc.
38
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
Assign the CoS priority bits to
a queue
Maps each of the incoming 802.1P CoS levels on any enabled port, to
any of the eight Horizon Compact Plus QoS Queues. The Horizon
Compact Plus system supports all eight 802.1P CoS levels (0-7).
Sequence:
set cos queue mapping [port] [x x x x x x x x ] press Enter
where port can be any enabled port p1, p2, p3, or p4, and each x is
a value in the range 1 to 8, representing the Horizon Compact Plus
QoS Queues allocated to each of the CoS levels (0-7) in order. Any
values not explicitly assigned a queue by the user will not be
affected by the command.
The system responds:
On port (port id) dot1p Queue assignment is as follows :
dot1p value CoSQueue
----------- -- ---------
0 [x]
1 [x]
2 [x]
3 [x]
4 [x]
5 [x]
6 [x]
7 [x]
Where [x] is a value in the range 1 to 8
Examples:
set cos queue mapping p1 1 1 2 3 4 5 7 7 press Enter
For port p1, will allocate CoS levels 0 and 1 to Horizon Compact
Plus QoS Queue 1, CoS level 2 to QoS Queue 2, CoS level 3 to
QoS Queue 3, CoS level 4 to QoS Queue 4, CoS level 5 to Q5 and
CoS levels 6 and 7 to Q7. Note that there is a space between each
of the digits in the command.
The system responds:
On port p1, dot1p queue assignment is as follows :
dot1p value CoSQueue
----------- -- ---------
0 1
1 1
2 2
3 3
4 4
5 5
6 7
7 7
Default value: Q4 for all CoS values.