User's Manual

Quality of Service (QoS)
43
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
Set the committed burst size
for each queue
Sets the committed burst size for each of the eight QoS queues (and
QC if ecfm or control flow mapping is enabled**), as a percentage of
the total queue memory available. There is a total of 100 msec worth
(16MB) of memory space allocated to QoS queues. A percentage of
this space is allocated to each of the eight queues.
Sequence:
set cos queue cbs [%1 %2 %3 %4 %5 %6 %7 %8] press Enter
where %1 %2 %3 %4 *%5 %6 %7 %8 is the percentage of the total
queue memory to be allocated to QoS Queues 1 through 8
respectively. Note that the total of all queues must equal 100%.
The system responds:
Queue Size (%)
1 %1
2 %2
3 %3
4 %4
5 %5
6 %6
7 %7
8 %8
Example:
get cos queue cbs press Enter
The system responds (default values shown):
Queue Size (%)
1 12
2 12
3 12
4 12
5 12
6 12
7 12
8 16
set cos queue cbs 6 6 10 10 15 15 16 22 press Enter
The system responds:
Queue Size (%)
1 6
2 6
3 10
4 10
5 15
6 15
7 16
8 22