User's Manual

DragonWave Inc.
46
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
Configure User Flow Mapping
This command enables you to configure any of the three predefined
flows.
Sequence:
set cos user flow press Enter
The system responds:
#Press 'Ctrl-X' to exit config process
#Press 'Enter' to retain previous value
Flow Id [ 1-3 ] (1) ? 1
Flow Mapping Status [ enable(1), disable(2) ] (disable) ? 1
Port 1 User Flow Mapping to Queue (8) ? 7
Port 2 User Flow Mapping to Queue (8) ? 5
CoS User Flow Queue Mapping
===================================================
User Flow | Status | User Class | Port 1 | Port 2
===================================================
flow 1 | enable | class 1 | queue 7 | queue 5
------------------------------------------------------------------------------
flow 2 | disable | class 2 | queue 8 | queue 8
------------------------------------------------------------------------------
flow 3 | enable | class 3 | queue 6 | queue 6
------------------------------------------------------------------------------
The user flow mappings are not applicable when QoS is off.