User's Manual

DragonWave Inc.
62
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
Review the atpc log
This command returns the list of events from the atpc log.
Sequence:
get atpc log press Enter
The system responds (example):
-------------------------------------------------------------------------------------------------------
ATPC LOGS
===========================================================
RSL (dBm) TRANSMIT POWER (dBm)
--------------- ------------------------------------
Time LOS PEER TARGET RANGE ACTUAL
----------------------------------- --- ------- ------- -------------- --------
2011-09-29 17:51:47.870 N -45.3 -46.0 -0.5 - 10.0 2.9
2011-09-29 17:51:47.762 N -46.2 -46.0 -0.5 - 10.0 3.6
2011-09-29 17:51:41.468 N -46.6 -46.0 -0.5 - 10.0 3.0
2011-09-29 17:51:41.367 N -45.8 -46.0 -0.5 - 10.0 2.4
2011-09-29 15:44:35.313 N -46.2 -46.0 -0.5 - 10.0 3.1
2011-09-29 15:41:05.414 N -45.7 -46.0 -0.5 - 10.0 2.5
2011-09-29 15:38:54.512 N -46.2 -46.0 -0.5 - 10.0 3.1
2011-09-29 15:38:24.611 N -45.8 -46.0 -0.5 - 10.0 2.4
2011-09-29 15:38:20.714 N -46.2 -46.0 -0.5 - 10.0 3.1
2011-09-29 15:38:04.354 N -45.8 -46.0 -0.5 - 10.0 2.4
2011-09-28 21:38:21.707 N -45.0 -46.0 -0.5 - 10.0 3.0
2011-09-28 21:38:21.644 N -47.6 -46.0 -0.5 - 10.0 4.0
2011-09-28 21:38:21.620 N -47.6 -46.0 -0.5 - 10.0 2.4
2011-09-28 21:38:21.594 N -44.2 -46.0 -0.5 - 10.0 0.8
2011-09-28 21:38:21.566 N -38.6 -46.0 -0.5 - 10.0 2.6
2011-09-28 21:38:21.012 Y -99.9 -99.9 -0.5 - 10.0 10.0
The log can be cleared by using the CLI command clear atpc log press
Enter.
Save changes to mib
Saves the MIB to RAM. Perform this command to save setting
changes to non-volatile memory.
Sequence:
save mib press Enter
The system responds:
MIB saved successfully.