User's Manual

Threshold Alarms
77
Horizon Compact Plus Release 1.0.1 Wireless Ethernet Product User Manual – Volume 2
Required Action
Steps
Configure the queue
utilization threshold for each
queue
This command enables you to set the queue utilization threshold for
each of the five QoS queues in the system.
Sequence:
set queue utilization threshold <queue> <%> <timelimit> press
Enter
Where <queue> is the queue number (1 to 5), <%> is the percent of
utilization threshold desired and <timelimit> is the desired time limit
(in seconds) over which the condition must occur before the alarm is
raised.
Example: set queue utilization threshold 4 75 25 press Enter
The system responds :
Queue Depth threshold set to :75 %
Queue Depth timelimit set to :25 secs
get queue utilization threshold press Enter
Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8
Queue Depth thresholds set to : 100 100 100 75 100 100 100 100 %
Queue Depth timelimits set to : 10 10 10 25 10 10 10 10 secs
Save changes to mib
Saves the MIB to RAM. Perform this command to save setting
changes to non-volatile memory.
Sequence:
save mib press Enter
The system responds:
MIB saved successfully.
This concludes the steps to configure Threshold Alarms for the Horizon Compact Plus system using
the CLI manager.