User's Manual
Table Of Contents
- 1 Preface
- 2 Overview
- 3 Features
- 3.1 Main Features
- 3.2 Adaptive Coding and Modulation (ACM)
- 3.3 Transmit Power Control (TPC)
- 3.4 2x2 Multiple-input and Multiple-output (2x2 MIMO)
- 3.5 Dynamic Frequency Selection (DFS)
- 3.6 Dynamic Channel Selection (DCS)
- 3.7 Retransmission
- 3.8 Configurable Uplink/Downlink Ratio
- 3.9 Quality of Service (QoS)
- 3.10 Power over Ethernet
- 3.11 Synchronization
- 3.12 Co-site Synchronization
- 3.13 OFDM Modulation
- 3.14 Low-density Parity Check (LDPC) Encoding
- 3.15 LLDP
- 3.16 Radio Port Performance Monitoring
- 3.17 Adaptive Noise Immunity (ANI)
- 4 Mechanical Structure and Interfaces
- 5 Product Structure
- 6 Management
- 7 Technical Specification
- 8 Standards
11
DragonWave Inc. Preface
minated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE) in electrical and
electronic equipment put on the market after 1 March 2007.
1.8 CE Statement
The CE conformity declaration for the product is fulfilled when the system is built and
cabled in line with the information given in the manual and the documentation specified
within it, such as installation instructions, cable lists or the like. Where necessary project-
specific documentation should be taken into consideration. Deviations from the specifi-
cations or independent modifications to the layout, such as use of cable types with lower
screening values for example, can lead to violation of the CE protection requirements.
In such cases the conformity declaration is invalidated. The responsibility for any
problems which subsequently arise rests with the party responsible for deviating from
the installation specifications.
Figure 2 CE Mark