User's Manual
Table Of Contents
- 1 Preface
- 2 Overview
- 3 Features
- 3.1 Main Features
- 3.2 Adaptive Coding and Modulation (ACM)
- 3.3 Transmit Power Control (TPC)
- 3.4 2x2 Multiple-input and Multiple-output (2x2 MIMO)
- 3.5 Dynamic Frequency Selection (DFS)
- 3.6 Dynamic Channel Selection (DCS)
- 3.7 Retransmission
- 3.8 Configurable Uplink/Downlink Ratio
- 3.9 Quality of Service (QoS)
- 3.10 Power over Ethernet
- 3.11 Synchronization
- 3.12 Co-site Synchronization
- 3.13 OFDM Modulation
- 3.14 Low-density Parity Check (LDPC) Encoding
- 3.15 LLDP
- 3.16 Radio Port Performance Monitoring
- 3.17 Adaptive Noise Immunity (ANI)
- 4 Mechanical Structure and Interfaces
- 5 Product Structure
- 6 Management
- 7 Technical Specification
- 8 Standards
14
DragonWave Inc.Overview
Figure 4 NLOS Application
2.2.2 Rural Backhaul
The need for extending cellular phone and data network to rural areas requires a
backhaul solution that achieves the lowest TCO while meeting the stringent link through-
put and distance requirements. Lite provides a cost-effective solution that supports long
ling-of-sight distance (> 20 km) using licensed and unlicensed frequency bands and
achieves high throughput and low latency.
2.2.3 Public Safety and Vertical Applications
Lite can also be used to build secure, reliable and cost effective transport for first
responders (police, fire and medical), video surveillance and sensor network backhaul-
ing along motorways, sea ports, electricity grid, oil and gas pipelines and border security
fence, etc.
2.3 Environmental Standards
In normal operation condition, the working temperature range for Lite is from -40 ºC to
+55 ºC. For the detailed information, refer to the document of Environmental Product
Declaration.