User's Manual
Table Of Contents
- 1 Preface
- 2 Overview
- 3 Features
- 3.1 Main Features
- 3.2 Adaptive Coding and Modulation (ACM)
- 3.3 Transmit Power Control (TPC)
- 3.4 2x2 Multiple-input and Multiple-output (2x2 MIMO)
- 3.5 Dynamic Frequency Selection (DFS)
- 3.6 Dynamic Channel Selection (DCS)
- 3.7 Retransmission
- 3.8 Configurable Uplink/Downlink Ratio
- 3.9 Quality of Service (QoS)
- 3.10 Power over Ethernet
- 3.11 Synchronization
- 3.12 Co-site Synchronization
- 3.13 OFDM Modulation
- 3.14 Low-density Parity Check (LDPC) Encoding
- 3.15 LLDP
- 3.16 Radio Port Performance Monitoring
- 3.17 Adaptive Noise Immunity (ANI)
- 4 Mechanical Structure and Interfaces
- 5 Product Structure
- 6 Management
- 7 Technical Specification
- 8 Standards
19
DragonWave Inc. Features
3.8 Configurable Uplink/Downlink Ratio
To meet the different market data model requirements, Lite supports configurable
uplink/downlink ratio to better utilize the radio bandwidth.
Lite downlink/uplink ratio can be set to 50:50, 70:30 or 30:70 which can improve the
bandwidth utilization for different scenarios. E.g., uplink and downlink traffic are not
usually balanced, the download traffic usually being much more than the uplink traffic.
In this case, 30:70 ratio can be used to improve bandwidth utilization.