User's Manual
Table Of Contents
- 1 Preface
- 2 Overview
- 3 Features
- 3.1 Main Features
- 3.2 Adaptive Coding and Modulation (ACM)
- 3.3 Transmit Power Control (TPC)
- 3.4 2x2 Multiple-input and Multiple-output (2x2 MIMO)
- 3.5 Dynamic Frequency Selection (DFS)
- 3.6 Dynamic Channel Selection (DCS)
- 3.7 Retransmission
- 3.8 Configurable Uplink/Downlink Ratio
- 3.9 Quality of Service (QoS)
- 3.10 Power over Ethernet
- 3.11 Synchronization
- 3.12 Co-site Synchronization
- 3.13 OFDM Modulation
- 3.14 Low-density Parity Check (LDPC) Encoding
- 3.15 LLDP
- 3.16 Radio Port Performance Monitoring
- 3.17 Adaptive Noise Immunity (ANI)
- 4 Mechanical Structure and Interfaces
- 5 Product Structure
- 6 Management
- 7 Technical Specification
- 8 Standards
43
DragonWave Inc. Management
Secured file transfer protocol (SFTP) is supported for the purpose of software download
and large file size downloads, e.g., performance monitoring data.
SSH is supported for remote command interface control.
6.5 Software Upgrade
Lite software can be upgraded from previous release so that new features will be sup-
ported without hardware change. The upgrade can be performed both locally or
remotely by Link Viewer.
6.6 License
The user who wants to use certain features has to purchase the corresponding licenses.
A license can be purchased together with the hardware and the application software
when the system is initially purchased, or it can be later purchased and installed onto an
already operating system. If the license is ordered together with the equipment, it is
installed during commissioning.
Lite is delivered to the customer with the basic software release and the basic license
pre-installed, so essential functions are enabled. There are additional features that may
be required, for instance, when the network scales up, or network security is required. If
additional features need to be activated, the customer can acquire an upgrading license.
The basic license configuration is 50 Mbps UL + DL capacity.
Lite provides the following upgrading licenses:
• Basic (50 Mbps) to 100 Mbps upgrade license;
• Basic (50 Mbps) to full-capacity (230 Mbps) upgrade license;
• 100 Mbps to full-capacity (230 Mbps) upgrade license;
• License for co-site synchronization;
• License for Ethernet OAM (in future release);
• License for 1588v2 TC clock synchronization (in future release);
• License for security (SNMPv3, SSH and SFTP) (in future release);
• License for Radio Ring (in future release).
The following country code licenses are used to meet different regulations in different
countries. One of them has to be purchased for use in different countries and areas.
• FCC (required in USA);
• ETSI (required in European countries);
• TELEC (required in Japan);
• ANATEL (required in Brazil);
• ICASA (required in South Africa);
• IC (required in Canada);
• RALI (required in Australia);
• ROW (required in rest of the world).
One country code license can only be activated once and is not allowed to be changed
to another one.
In-field license upgrade is also supported, which can be performed by customer service
staff or by the user. The upgrade can be performed both locally and remotely using DWI