Manual

11
Fig. 9. Field of vision view:
Plotted to the left and to the right from the angle marks is the scale
of deflection corrections. The value of each division is 0-01.
The values of deflection corrections 0-05 and 0-10 are marked out by
an elongated dash line.
The value of deflection correction 0-10 is marked out by an elongated
dash line and designated by a digit 10. Two horizontal dash lines are
plotted from the right and from the left of the deflection correction
scale. The range-finding scale located from the left under the
deflection correction scale serves for detecting the range up to the
target. The range-finding scale represents two lines. The upper (curve)
line is calculated for a target 1.7 m in height and is marked with
digits 2, 4, 6, 8 and 10.
The sight reticle is displaced in two directions, which are
perpendicular to each other, but it is always remains in an objective
focal plane.
* Note. It is possible to complete the rifle with the sight of PSO-
1Ì2 make without the screen, colored glass and handle.
1.6. Sniper rifle accessories
1.6.1. The sniper rifle accessories (Fig. 10) are used in
disassembling, cleaning and lubricating the sniper rifle and are
carried in the bag intended for the sight and magazines.
1.6.2. The set of accessories includes: a cheek plate, a cleaning rod,
a scourer, a bristle brush, a screwdriver, a drift, a container and an
oiler.
THE CHEEK PLATE is used when firing the rifle with the optical sight.
In this case it is put on the rifle butt and fixed on the latter by
means of the lock.
THE CLEANING ROD is used to clean and lubricate the barrel bore,
passages and cavities of other parts of the rifle. The cleaning rod
consists of three sections screwed to one another.