Manual

12
THE SCOURER is used for cleaning and lubricating the barrel bore as
well as the passages and cavities of other rifle parts.
THE BRISTLE BRUSH is intended for cleaning the barrel bore with the
RCHS solution.
THE SCREWDRIVER is used in disassembling, assembling the rifle and in
cleaning the gas chamber and the gas tube. It is also used as a wrench
to adjust the front sight position in height.
THE DRIFT is used for driving the pins and studs out.
THE ACCESSORIES CONTAINER houses the scourer, the bristle brush, the
screwdriver and the drift. It consists of two component parts: a
container-wrench and a cover.
The container-wrench is used as a handle of the cleaning rod, when
cleaning and lubricating the rifle and as a handle of the screwdriver
when disassembling and assembling the rifle, and as a wrench when
detaching the gas tube and assembling the cleaning rod.
THE CONTAINER COVER is used as a muzzle protector in cleaning the
barrel.
THE OILER is used for storage of the lubricant.
Fig. 10. Accessories to rifle:
1 - container cover; 2 - bristle brush; 3 - screwdriver; 4 - scourer; 5
- drift; 6 -container body; 7 - oiler; 8 - cheek plate; 9 - cleaning
rod; 10 - cleaning rod extender; 11 - cleaning rod extender, front
1.7. Individual SPTA set to sight
1.7.1. Individual SPTA set (Fig. 11) serves for providing normal
functioning of the sight and replacement of separate failed parts.
1.7.2. Individual SPTA set includes: illuminating system, colored
glass, wrench, napkin, supply sources, (sections 2RC63), lamps (in
cassette) and a cap.
** Notes. 1. One of the sections is placed into the sight. 2. The
napkin is not shown conventionally.