Product data

12
PANEL
DESIGN
PANEL
DESIGN
PROJECT
DR PN
DRAWING NO.
SCALE
HALF
RACK PANEL TEMPLATE
801 North East Street
Frederick, MD 21701
PHONE [phone]
FAX [phone]
STEP 1.
Make copies of rack panels and half scale symbols on pages 18 & 19.
STEP 2.
Trace or Paste
Place the symbol page under the
copy of the rack panel and trace
the devices on the blank plate
at the desired location
OR
cut out the appropriate devices
from the copy of the symbol page
and paste them on the blank plate
at the desired location.
*Be sure to note device sizes and
usable area of rack panel.
STEP 3.
Write in text to be engraved on panel.
If the panel has multiple quantities,
indicate subsequent engraving.
STEP 5.
Fax completed panel design to our
AVD Sales Department for quotation.
STEP 4.
Indicate panel designation, quantity,
and finish type, and any other additional
engraving or silkscreening
requirements. Fill title block with
appropriate information, if desired.
LAYOUT INSTRUCTIONS
▲
▲
▲▲
▲
▲▲
▲
Usable Area Behind Panel
Usable Area Behind Panel
Usable Area Behind Panel
801 North East Street
Frederick, MD 21701
PHONE: [phone]
FAX: [phone]
801 North East Street
Frederick, MD 21701
PHONE: [phone]
FAX: [phone]
801 North East Street
Frederick, MD 21701
PHONE: [phone]
FAX: [phone]
801 North East Street
Frederick, MD 21701
PHONE: [phone]
FAX: [phone]