Superior Broadcast TXU600D Transmitter T XU600D Transmitter User Manual Superior Broadcast
Superior Broadcast ATSC 3000 Exciter User Manual Superior Broadcast 1 8 2 0 8 P r e s t o n R d . S u i t e D 9 - 2 9 7 , D a l l a s , T X 7 5 2 5 2 . w w w. s b p - t v.
Superior Broadcast ATSC 3000 Exciter S u p e r i o r B ro a d cast where the B est Cost L ess C a l l u s t o d a y. We want to talk to You Superior Broadcast 18208 Preston Rd. Suite D9-297, Dallas, TX 75428 Tel: 972-473-2577 | Email: jjsbp@msn.com www.sbp-tv.com All rights reserved. Printed and bound in the U.S.A .
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide Contents 1 Product Appearance ............................................................................................3 1.1 Front Panel .......................................................................................................3 1.2 Back Panel .......................................................................................................3 2 Operation Specifications.......................................................
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide 1 Product Appearance 1.
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide 2 Operation Specifications Environment Operating Temperature: Operating Humidity: Atmospheric Pressure: Power Supply Voltage: Frequency: Inputs/Outputs RF_IN_A /RF_IN_B Connector: Impedance: Level: -10 ~ 50 oC ≤ 95% 86 kPa ~ 106 kPa 88 ~ 264 VAC 50 / 60 Hz BNC female 50 Ω -30 dBm ~ 0 dBm Recommended range: -15 dBm ~ -5 dBm Back Panel Location: RF_OUT Connector: N-type female Impedance: 50 Ω
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide Location: Back Panel TS_OUT_1/ TS_OUT_2 Connector: BNC female Impedance: 75 Ω Location: Back Panel RF_MON FEEDBACK (loop out of [RF_IN_A]) Connector: BNC female Impedance: 50 Ω Level: -11 dB below [RF_IN_A]'s output level Location: Front Panel Table 1 ASI Input Specifications No Content Unit Value 1 Input Level mv ≥ 200 2 Positive Transition (20%~80%) ps ≤ 1200 3 Negative Transition (20%~80%) ps ≤ 1200
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide 3 Menu 3.1 Initialization Connect power supply then turn on the exciter. The initialization process takes about 5 seconds to finish while RF output level increases gradually to the pre-set value. 3.2 Query Mode Query mode is a mode which displays parameters and status of exciter. There are three pages in query mode. Press "Right" or "Left" button to switch between different pages which are shown from Table 2 to Table 4 as below.
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide "Left" and "Right" buttons at the same time in query mode. Main menu in control mode is shown in Table 5. Table 5 Main Menu in Control Mode Welcome to setting interface! *SYSTEM RF MODE CONFIG Main menu consists of 4 sub-menus: SYSTEM, RF, MODE and CONFIG. When on main menu in control mode, press "Left" or "Right" button to move the cursor and press "OK" button to enter the target sub-menu.
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide Table 7 RF Menu in Control Mode *RF FREQ Hz POWER AGC ON 707M +00000 +0.00 OFF ON 473M -50000 -25.00 OFF OFF 479M -49999 -24.95 ON 485M -49998 -24.90 ... ... ... ... ... ... ... ... ... 875M +49998 +4.90 881M +49999 +4.95 887M +50000 +5.00 Default Options Note: 1) The "Hz" parameter in "FREQ" sub-menu is the direct adjustment of the frequency of RF output signal.
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide Note: 1) "UPGRADE" is a mode to upgrade the firmware of micro controller. It’s only available for advanced users. If there is any misoperation, restart the exciter to cancel the upgrade process. 2) "IP", "GATEWAY", and "MASK" are used to establish a valid Ethernet connection for remote control via RJ45. The exciter has a built-in WEB GUI which requires only a standard web browser run by a PC.
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide 4 Connection 4.1 Connect the Transmitter Don’t turn on or off the exciter when the transmitter is running. The correct order is: First of all turn on the exciter. Measure the RF output level of the exciter to make sure it meets the requirement of the transmitter input level. If the output level is out of range, change the parameter "POWER" in "RF" sub-menu in control mode to make the adjustments.
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide 3) performance. If any abnormal situation occurs during the ADPC process, the system will bypass all the pre-correction data immediately and leave the corresponding tips on LCD. Press any key to cancel the ADPC function manually and restart the ADPC function again after the problems are resolved. Refer to Chapter 5 for further information.
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide 5 Troubleshooting 5.1 Input TS1 ERROR Alarm message LCD: TS1 ERR LED_ TS1: Off LED_ TSErr: On Cause: Input signal from port [TS_IN_1] is lost or has invalid format. Solution: Check connection of port [TS_IN_1], and make sure input signal has valid format. TS2 ERROR Alarm message LCD: TS2 ERROR LED_ TS2: Off LED_ TSErr: On Cause: Input signal from port [TS_IN_2] is lost or has invalid format.
Superior Broadcast ATSC 3000 Exciter ATSC3000 Exciter User Guide dBm to 0 dBm, and the recommended range is from -15 dBm to -5 dBm. Feedback Signal Connection Error Alarm message LCD: FEEDBACK LINK ERROR! Press Any key to Esc LED_ SysErr: Flashing (during the ADPC process) Cause: Feedback signal connection is interrupted, or signal level changes dramatically during the ADPC process.
Superior Broadcast ATSC 3000 Exciter S u p e r i o r B ro a d cast, where the B est Cost L ess C a l l u s t o d a y. We want to talk to You Superior Broadcast 18208 Preston Rd, Suite D9-297, Dallas, TX 75252 Tel: 972-473-2577 | Email: jjsbp@msn.com www.sbp-tv.com All rights reserved. Printed and bound in the U.S.A .
S u p e r i o r B ro a d cast where the B est Cost L ess C a l l u s t o d a y. We want to talk to You Superior Broadcast Jimmie Joynt Tel: 972-473-2577 | Email: jjsbp@msn.com 1 8 2 0 8 P r e s t o n R d . S u i t e D 9 - 2 9 7 , D a l l a s , T X 7 5 2 5 2 . w w w. s b p - t v.
Superior Broadcast Superior Transmitters Superior Broadcast 1 8 2 0 8 P r e s t o n R d . S u i t e D 9 - 2 9 7 , D a l l a s , T X 7 5 2 5 2 . w w w. s b p - t v.
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast 9
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder
Superior Broadcast EH24 Multi-Channel Encoder S u p e r i o r B ro a d cast, where the B est Cost L ess C a l l u s t o d a y. We want to talk to You Superior Broadcast 18208 Preston Rd, Suite D9-297, Dallas, TX 75252 Tel: 972-473-2577 | Email: jjsbp@msn.com www.sbp-tv.com All rights reserved. Printed and bound in the U.S.A .
S u p e r i o r B ro a d cast where the B est Cost L ess C a l l u s t o d a y. We want to talk to You Superior Broadcast Jimmie Joynt Tel: 972-473-2577 | Email: jjsbp@msn.com 1 8 2 0 8 P r e s t o n R d . S u i t e D 9 - 2 9 7 , D a l l a s , T X 7 5 2 5 2 . w w w. s b p - t v.
Superior Broadcast 500 W Amplifier Superior Broadcast 1 8 2 0 8 P r e s t o n R d . S u i t e D 9 - 2 9 7 , D a l l a s , T X 7 5 2 5 2 . w w w. s b p - t v.
Superior Broadcast ATVCA Amplifier S u p e r i o r B ro a d cast where the B est Cost L ess C a l l u s t o d a y. We want to talk to You Superior Broadcast 18208 Preston Rd, Suite D9-297, Dallas, TX 75252 Tel: 972-473-2577 | Email: jjsbp@msn.com www.sbp-tv.com All rights reserved. Printed and bound in the U.S.A .
Superior Boadcast ATVCA Amplifier Table of Contents 1. Preliminary Instructions ............................................... 1 2. Warranty.......................................................................... 1 3. First Aid .......................................................................... 2 3.1 Treatment of electrical shocks ............................. 2 3.2 Treatment of electrical Burns ............................... 2 4.
Superior Broadcast ATVCA Amplifier This page was intentionally left blank ii AT VC A Amplifier User Manual Rev. 1.
ATVST-CNV Superior Boadcast ATVCA Amplifier IMPORTANT The lightning flash with arrowhead, within a triangle, is intended to alert the user of the presence of dangerous voltage that may constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the equipment. Preliminary Instructions 1. Preliminary 1.
Superior Broadcast ATVCA Amplifier Superior Broadcast. is never responsible for damage or loss), until the package reaches R.V.R. premises. For this reason, we suggest you to insure the goods for the whole value. Shipment must be effected C.I.F.
Superior Boadcast ATVCA Amplifier ATVCA 4. General Description The ATVCA is an analog TV broadcasting amplifier manufactured by R.V.R. Elettronica SpA delivering up to 1000 WPS under 50 Ohm standard load and less than 100W drive power requirement. The ATVCA has been designed for installation in a 19”x3HE box for rack. 4.1 Unpacking The package contains: 1 ATVCA 1 User Manual 1 Mains power cable The following accessories are also available from Your R.V.R. Dealer: • 4.
ATVCA Superior Broadcast ATVCA Amplifier The rear panel features the mains input connectors, RF power input and output connectors, remote connector, protection fuse, interlock input and interlock output connectors and a BNC connector that provides an RF test point with a level suitable to execute the measurement. 4 / 32 AT VC A Amplifier User Manual Rev. 1.
Superior Boadcast ATVCA Amplifier ATVCA 4.3 Frontal Panel Description [1] DISPLAY [2] ON [3] LOCAL [4] WARNING/INTERLOCK [5] WAIT/FAULT [6] [7] [8] [9] [10] CONTRAST AIR FLOW POWER ESC [11] [12] ENTER Superior Broadcast User Manual LCD display. Green LED: indicates that the amplifier is switched on. Yellow LED: indicates that the amplifier is in local control mode. Yellow LED: indicates a condition that doesn’t inhibit the output of the transmitter and is reported via GUI and telemetry.
ATVCA Superior Broadcast ATVCA Amplifier 4.4 Rear Panel Description [1] AIR FLOW [2] RF OUT [3] SERVICE [4] [5] [6] [7] [8] [9] I2C BUS TELEMETRY RF IN MAINS FUSE 1 RF MONITOR [10] INTERLOCK OUT [11] FUSE 2 6 / 32 AT VC A Amplifier User Manual Grill for the ventilation flow passage RF output connector (7/8” EIA flange) DB9 connector for interconnection with other devices and factory parameters programming (only for factory programming).
ATVCA Superior Boadcast ATVCA Amplifier 4.5 4.5.1 Connector Description Telemetry Connector Type: DB25 Female 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 4.5.2 Internal SWR Disabled RF power amplifier voltage 3,9V x 50V GND GND Reflected Power 3,9V x 100W Interlock Set 4 GND GND “On” Command Set 1 WAIT Reset alarm OFF Interlock Temperature 3.9V x 100° RF power amplifier current 3.
ATVCA Superior Broadcast ATVCA Amplifier 4.5.3 I2C Connector Type: DB9 Female 1 2 3 4 5 6 7 8 9 8 / 32 AT VC A Amplifier User Manual NC SDA SCL NC GND NC NC NC NC Serial Data Serial Clock GND Rev. 1.
ATVCA Superior Boadcast ATVCA Amplifier 4.6 Technical Description ATVCA1K0LU1 Parameters Frequency range Rated output power Input power for rated output Power supply type AC Supply Voltage DC Supply Voltage AC Apparent Power Consumption Active Power Consumption RF Fan active Power consumption RF module efficiency Overall efficiency Input device Display Overall Phisical Dimensions Ambient working temperature Spurious & harmonic suppression Conditions U.M.
ATVCA Superior Broadcast ATVCA Amplifier 5. Setting 5.1 Setting on air 1. Connect the RF output power of a suitable TV exciter (e.g. the DTVPE of R.V.R. Elettronica) to the RF input (RF module) using a cable fitted with N type connectors. The exciter should be set to minimum output power and switched OFF. 2. Connect the amplifier’s INTERLOCK output connector to the exciter’s Interlock input, if available (it is available in all RVR Elettronica exciters) using a twin wire with BNC connectors.
ATVCA Superior Boadcast ATVCA Amplifier 6. Start Up 6.1 Important to Know The amplifier must laid-on firmly before its switch-on. Mechanical tension and mobility of some parts can stress sensitive electrical connection, some of these are tuned accurately for the working RF channel and so, their fixing may be a demanding job. User should take care about RF output connection, grip all screws fairly and secure RF output filter and its interconnecting transmission lines.
ATVCA Superior Broadcast ATVCA Amplifier Concerning mains voltage wires, these must be assured with their terminals. Neutral and Ground connection particularly is a very worrying matter. A well made Ground connection assures safe interaction between users and equipments. In a three phase star configured mains voltage connection, Neutral wire is very important. In such a configuration, when Neutral connection is precarious or even worse broken, permanent serious damage occur certainly to the amplifier.
ATVCA Superior Boadcast ATVCA Amplifier The ON LEDs on both modules will turn on and the forced cooling fans will start running. The LCD shows the introductory screenful and then switches to a screenful that indicates the forward and reflected power values. Turn on the exciter (at lowest power) and wait for its complete bootstrap routine. Once ready, increase RF power output gradually and check on amplifier’s LCD display.
ATVCA Superior Broadcast ATVCA Amplifier About user interface, the amplifier can be set in two modalities, ‘LOCAL’ or ‘REMOTE’. This double option is selectable by ‘Fnc’ → ’Sts’ menu. We suggest customer to set this switch in ‘REMOTE’. No damage occur to the amplifier also if it operates continuously in ‘LOCAL’ set, but user has faculty to set unintentionally the amplifier to operate in a different mode then planed, especially when navigating amid menus with a not firm skill.
Superior BoadcastATVCA ATVCA Amplifier 7. Hardware 7.1 7.1.1 Identification of the Modules UHF Version Upper view (ATVCA1K0LU1) The figure below shows the equipment upper view with the various components pointed out. figure 7.
ATVCA Superior Broadcast ATVCA Amplifier 7.1.2 UHF Version Bottom view (ATVCA1K0LU1) The figure below shows the equipment upper view with the various components pointed out. figure 7.
ATVCA Superior Boadcast ATVCA Amplifier 7.2 Descriptions 7.2.1 Interface Card This card has the following main functions: 1. Normalization of all the analog signals from various sensors/detectors and hand them over to the CPU. 2. Implementation and management of hardware high-speed protection to protect the machine. 3. Interfacement for telemetry and serial communication with the CPU In particular: 1. Standardization reading directional coupler with digital trimmer SPI, rms and peak detector. 2.
ATVCA Superior Broadcast ATVCA Amplifier 7.2.3 RF Pre-Driver Amplifier Card This is the first stage of RF amplification. Works with power below 1W and has a gain of about 18dB. It ‘s a class A amplifier, with a feature of high linearity. It has an RF input, an RF output and a power connector. 7.2.4 RF Driver Amplifier Card The driver is an RF amplifier that can drive the RF final. Works with power of about 10 watts and has a gain of about 15dB.
ATVCA Superior Boadcast ATVCA Amplifier 7.2.9 Current Meter Card This card implements two functions. The first is the reading of currents that are absorbed by the RF power amplifiers, driver and pre-driver. The second function is to provide electric protection through fast intervention fuses. The measurements taken are delivered to the interface card. 7.2.10 Surge Protection This card is the first stage of power supply. It is directly connected to the electric system and protects the afterwards card.
ATVCA Superior Broadcast ATVCA Amplifier 7.2.17 Panel Card This card is the interface between equipment and user. It has a 16x2 character display for viewing all menus, the four buttons for selection and four status LEDs. 7.2.18 CPU The CPU is the central processor unit of entire equipment. From here start and return all the signals. This is mounted on the interface card, because it has a continuous exchange of information with it.
ATVCA Superior Boadcast ATVCA Amplifier 8. Firmware 8.1 Descriptions This chapter describes the ways in which the microprocessor controls the amplifier and how the user may interact by software. Symbols listed below appear in the left portion of the display: (Cursor) - Blinks selected (i.e. accessible) menu. (Filled arrow) - Editable parameter marker. This symbol appears in menus that take up more than two lines to aid browsing. (Three empty arrows) - Parameter is being edited.
ATVCA Superior Broadcast ATVCA Amplifier When turned on, the LCD shows the introductory screen with the equipment’s software and hardware versions. A few seconds later the main screen shows RF output forward and reflected power values: Press the ESC key to view the selection screenful from which to access all the menus: To access one of the submenus select its name (which is underlined by a blinking cursor) using the RIGHT or LEFT keys and then press the ENTER key.
ATVCA Superior Boadcast ATVCA Amplifier Pwr It enables (ON) or disables (OFF) the RF power output. Sts It modifies machine operation. In the LOCAL mode, the machine can read and modify its operating parameters through the navigation keys and the management firmware, whereas all other setting gates are locked out. In the REMOTE mode, the machine can only read its operating parameters; in this case parameters are modified based on the command received from other connected telemetry system.
ATVCA Superior Broadcast ATVCA Amplifier 8.1.2 RadioFrequency Menu (R.F.) This page holds all reading related to machine’s RF power: Note that these are reading, rather than setting and cannot be edited (note the empty arrow). Fwd Rfl Inp Vdr Idr Vpd Forward power reading. Reflected power reading. Input power reading. Driver voltage reading. Driver current reading. Pre-driver voltage reading. Ipd Pre-driver current reading. 32 Manual AT VC A Amplifier/User Rev. 1.
Superior Boadcast ATVCA ATVCA Amplifier V1 I1 V2 I2 V3 I3 V4 I4 V5 I5 V6 I6 8.1.3 Pallet 1 voltage reading. Pallet 1 current reading. Pallet 2 voltage reading. Pallet 2 current reading. Pallet 3 voltage reading. Pallet 3 current reading. Pallet 4 voltage reading. Pallet 4 current reading. Pallet 5 voltage reading. Pallet 5 current reading. Pallet 6 voltage reading. Pallet 6 current reading. Power Supply Menu (P.
ATVCA Superior Broadcast ATVCA Amplifier 8.1.4 Setting Menu (Set) In this menu, you can set the working channel (CH) and power control (PwR). CH PwC 8.1.5 Set the working Channel. Set the power control function. Alarms Menu (Alm) This menu shows any alarm condition occurring during machine’s operation. Alarm thresholds are preset by factory. FWD RFL INP IPA Counter of alarm conditions triggered by forward power. Counter of alarm conditions triggered by reflected power.
ATVCA Superior Boadcast ATVCA Amplifier If machine re-starts successfully, all alarm counters are reset after 30 minutes of regular operation. After 10 alarm conditions triggered by the same cause, the machine goes into fault lock-out mode, a lock-out mode warning appears on the display and the ‘FAULT’ LED turns on. After an alarm condition has been rectified, the counter may be reset by highlighting ‘Reset Alm’ and holding down the ENTER key a few time. 8.1.
ATVCA Superior Broadcast ATVCA Amplifier 8.2 8.2.1 Working Logic Protection System The protection system implemented inside the amplifier is based on one type of intervention. The Shut Down type of reaction consists in turning OFF the equipment’s amplifying section when a specific variable exceeds a set value.
ATVCA Superior Boadcast ATVCA Amplifier 1. Over Forward Power Forward power threshold exceeded. !! ATTENTION !! OVER FWD Power 2. Over Reflected Power Reflected power threshold exceeded. !! ATTENTION !! OVER RFL Power 3. Over Input Power Input power threshold exceeded. !! ATTENTION !! OVER INP Power 4. Over Input Power Current absorbed threshold exceeded.
ATVCA Superior Broadcast ATVCA Amplifier !!HALTED FOR !! OVER FWD Power II. Over Reflected Power Reflected power alarm display. !!HALTED FOR !! OVER INP Power III. Over Input Power Input power alarm display. !!HALTED FOR !! OVER INP Power IV. Over Input Power Current absorbed alarm display.
ATVCA Superior Boadcast ATVCA Amplifier 5. Over Temperature Temperature power threshold exceeded. !! ATTENTION !! OVER TEMPERATURE Machine restores itself when temperature become regular and no protection counter is incremented. Out of gain is a sixth alarm that does not trigger a permanent ‘WARNING” condition,when it occurs the machine doesn’t interrupts its working. When it occurs, appropriate yellow LED turns on and the following screen appears: Manual SuperiorUser Broadcast Rev. 1.
ATVCA Superior Broadcast ATVCA Amplifier This page was intentionally left blank 32 / 32 AT VC A Amplifier User Manual Rev. 1.
Superior Boadcast ATVCA Amplifier ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ___
Superior Broadcast ATVCA Amplifier ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ __
Superior Boadcast ATVCA Amplifier ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ___
S u p e r i o r B ro a d cast where the B est Cost L ess C a l l u s t o d a y. We want to talk to You Superior Broadcast Jimmie Joynt Tel: 972-473-2577 | Email: jjsbp@msn.com 1 8 2 0 8 P r e s t o n R d . S u i t e D 9 - 2 9 7 , D a l l a s , T X 7 5 2 5 2 . w w w. s b p - t v.
Superior Broadcast TXU600D Transmitter Superior Broadcast T XU600D Transmitter User Manual