Instruction manual

Useeitherthetelevision'sowntuneroracableboxtoselectchannels.SetthisswitchtoTVto

operatethetelevision'sbuilt-intuner.MovetheswitchtoCATVtooperateacablebox.

Note:

• Seepage33forinformationonprogrammingyourremoteforcableboxoperation.

YoucancontrolaVCRorDVDplayerwiththebuttonsonthelowerpartoftheremotecontrol.

MovetheslideswitchtoVCRorDVDtooperate.

Notes:

• Theremoteispresetwiththecode000tocontrolJVC-brandVCR's.Foranyother

manufactureCsbrandVCR,pleaseseethecodechartandinstructionsonpage34.

• Theremoteispresetwiththecode000tocontrolJVC-brandDVDplayers.Foranyother

manufactureCsbrandDVDplayer,pleaseseethecodechartandinstructionsonpage35.

kvLo,]_| :f!_;i_J_"_

You can use this remote control to operate the basic functions of your VCR. These functions

include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on and

power off.

Move the selector switch to VCR to operate.

• The remote is preset with the code 000 to control JVC-brand VCR's. For any other

manufactureCs brand VCR, please see the code chart and instructions on page 34.

You can also use this remote control to operate the basic functions of your DVD player. These

functions include: play, rewind, fast-forward, stop, stilllpause, previous/next, tray open/close,

power on and power off.

Move the selector switch to DVD to operate.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other

manufactureCs brand DVD player, please see the code chart and instructions on page 35.

All remote control buttons are illuminated, except for the TV/CATV slide switch, VCR/DVD slide

switch and Light button. Press the LIGHTbutton to turn the illumination on for 4 seconds.