Instruction manual

RF
Input Frequency:
Input Level:
Noise Figure:
Image Rejection:
Input Impedance:
VIDEO
Output Level:
Output Impedance:
Differential Gain:
Differential Phase:
L/C Delay:
AUDIO
Output Level:
Output Impedance:
METERING
Video:
Audio:
GENERAL
AC Power Input:
Operating Temperature:
Dimensions:
Weight:
Connectors:
54 - 806 MHz,
Off-Air: Channels 2 - 69.
CATV: Channels 2 - 125.
-10 to +35 dBmV.
VHF: 8 dB; UHF: 10 dB.
VHF: 65 dB; UHF: 50 dB.
75 Ohms.
1.0 Vp-p nominal, NTSC standard negative sync.
75 Ohms.
Less than 5%.
Less than 5 degrees.
125 nSec nominal.
300 mV rms nominal, unbalanced.
Less than 500 Ohms.
0% to 100% AM modulation. 87.5% is set point.
0% to 100% of 25 kHz peak FM deviation.
115 VAC ±10%, 60 Hz, 10 Watts.
0
0
C to +50
0
C, ambient.
19” W x 1.75” H x 4” D.
4.3 lbs (2.0 Kg).
RF Input and Video Output are type F. Balanced
Audio Unbalanced Audio Output is RCA phono.
MM806 Modulation Monitor Specifications Sheet
0 20 40 60 80 100
% MODULATION
0 20 40 60 80 100
% MODULATION
2 5
POWER
CATV
MODE
CATV +100
CHANNEL
VIDEO
100% = 25 kHz PEAK
AUDIO
DEPTH OF MODULATION
BCTV
MM806 MODULATION MONITOR
®
© Copyright 2001 R. L. Drake Company
For: Direct A/V Inc.
R.L. Drake Company
230 Industrial Drive
Franklin, Ohio 45005 U.S.A.
Sales: [phone]
Telefax: [phone]
World Wide Web Site: http://www.rldrake.com
Specifications subject to change without notice or obligation.